Hart Brand
Hart Brand Pressure Treated Posts
The type of wood and the method of treatment are of prime importance when choosing wood posts. Because of its superior strength, Southern Yellow Pine has long been a preferred choice for Hart Brand posts. Heating the preservative helps to insure proper penetration of the wood.
Hart Brand Penta In Oil Pressure Treated Southern Pine Posts
3" dia. x 6' or 6-1/2 Saw Sharpened Drive Posts
3-1/2 dia. x 6-1/2 or 7' Line Posts
4" or 4-1/2 dia. x 7' Popular Line Posts
4” x 7’ Quarter Round Line Posts - quartered from 8 ½” dia. posts
5" or 5-1/2 dia. x 7' Heavy Line Posts
6" dia. x 7' Corner Posts
6” x 9’ Corner, End or Brace Posts
7" dia. x 7' Gate Posts
4" or 4-1/2" dia. x 8' Line Posts or Brace
5" or 5-1/2" dia. x 8' Brace or Corner Posts
6" x 8' Popular Corner, End or Brace Posts
7" dia. x 8' Gate Post or Corner Posts - Hi-Tensile Fence Posts - Confinement Area Posts
8" dia. x 8' Gate Posts - Wide Gates
8" dia. x 9' Gate Posts - Heavy Wide Gates
6" dia. x 10' Corner Posts - Deer Fence or Hi-Tensile Fence
Popular Posts For Board Fences and Low Retaining Walls
4-1/2" dia. x 7' Rounds - slabbed one side
5-1/2" dia. x 7' Rounds - slabbed one side
5-1/2" dia. x 8' Rounds - slabbed one side
7" x 7' Half Round Posts
7" x 8' Half Round Posts
7” x 8’ Double Slabbed to 6” x 8’ - for use in log style retaining or building walls
Utility Poles, Boards and Timbers
6" dia. x 25ó30 or 35' Utility Poles
l" x 6" x 16' Full Thick Fence Boards
2" x 6" x 16' S4S or Full Thick Fence Boards
4" x 4", 4" x 6", 6" x 6", 6" x 8", 8" x 8", or 1 0" x 1 0"
Full Thick or S4S Timbers from 8’ through 16’ for numerous construction applications in lengths to 26’
Hart Brand Stockade Posts
Keep your stockade panels in place with Hart Brand Stockade Panel Posts made of hi-carbon steel. Easy to install, these Panel Posts may be used with any style of stockade panels and deliver over twice the strength of studded "T"s.
5' and 7' Fabricated Stockade Panel Posts with attaching hardware
Hart Brand Fence Braces
Braces are an integral part of most types of fence, and Hart Brand braces provide you with maximum strength and lasting durability. Made of sturdy, lightweight hi-carbon steel, sizes include an 8' horizontal brace (specified for state right-of-way fencing) as well as 8' and 9' diagonal braces.
We own and operate our own mills and wood treatment facility to ensure that Hart Brand quality is maintained. Each post is fully seasoned prior to treatment. Our oil-based preservative solution will not corrode fence wires or staples. The wood is far less likely to split or crack and will maintain its strength over time.
When fully seasoned, Southern Pine is light in weight and readily accepts and holds nails and staples.